DA101 2016-12-29T09:17:33+00:00

Wiper Seals – Style

Uses: This is a snap-in wiper ring. it is all plastic or all rubber, depending on the material you select. This wiper ring snaps into a counter bored groove.

NoteWe can ship this style wiper ring fast up to 12 inches or 300 MM outside diameter. This wiper ring is also available up to 60 inches or 1500 MM outside diameter but may require a longer production time.

Cross Reference: Directly interchanges with: Seal-Jet A1, Simrit / Disgrin Snap in, D-Wiper, AN wiper, Parker AN wiper, 959, P6, PU6.

This seal is infinitely variable in sizing. We can change any dimension to suit your seal application – whether it be for changes in the metal parts you made, wear on the component where the seal fits or redesigning an existing piece of equipment. Changes as little as .001″ or 0.25 MM can be made.

Materials Available for EPM Style DA101
EPDM Rubber (EPDM)
Nitrile (NBR)
Polyurethane (HPU)
Silicone (SIL)
Fluorocarbon Rubber (FPM)

Please include materials in your order

EPM, Inc – Your one stop for standard and custom hydraulic seals.

Use any of the following ways to contact us for a quote on this style seal.

Call Us
Call Free in the U.S. – (800) 659-5050
Local & International – (770) 389-0501

Fill-Out Short Online Form (click here)

Send Us The Seals
Contact your EPM Seal Specialist and they will give you the EPM FedEx or UPS account number to cover the shipping charges. Then, you can send us your old seals to the address below.
EPM Inc.
112 West Burke Street
Suite G
Stockbridge, GA 30281

Free in the U.S. – (888) 353-7325
Local & International – (770) 389-0652



Contact Us

EPM, Inc.
112 W Burke St.
Stockbridge, GA 30281

Phones and Fax Numbers

Call Free in the US: 800.659.5050
Local & International: 770.389.0501
Fax U.S: 888.353.7325
Fax Local & International: 770.389.0652