DS106 2016-12-29T09:17:34+00:00

Rod Seal – Style DS106

Uses: This is a symetrical u-cup that can be used as either a rod seal or piston seal on a hydraulic cylinder.

Note: We can ship this style seal fast up to 12 inches or 300 MM outside diameter. This seal is also available up to 60 inches or 1500 MM outside diameter but may require a longer production time.

Cross ReferenceDirectly interchanges with: Seal-Jet S6, chesterton Super Monoseal, Garlock 9220, Hallite 601, Simrit / Disogrin Symetrical seal, Walker Lionsele.

This seal is infinitely variable in sizing. We can change any dimension to suit your seal application – whether it be for changes in the metal parts you made, wear on the component where the seal fits or redesigning an existing piece of equipment. Changes as little as .001″ or 0.25 MM can be made.

Materials Available for EPM Style DS106
EPDM Rubber (EPDM)
Nitrile (NBR)
Polyurethane (HPU)
Silicone (SIL)
Fluoroelastomer (FPM)

Please include materials in your order

Use any of the following ways to contact us for a quote on this style seal.

Call Us
Call Free in the U.S. – (800) 659-5050
Local & International – (770) 389-0501

Fill-Out Short Online Form (click here)

Send Us The Seals
Contact your EPM Seal Specialist and they will give you the EPM FedEx or UPS account number to cover the shipping charges. Then, you can send us your old seals to the address below.
EPM Inc.
112 West Burke Street
Suite G
Stockbridge, GA 30281

Free in the U.S. – (888) 353-7325
Local & International – (770) 389-0652


Contact Us

EPM, Inc.
112 W Burke St.
Stockbridge, GA 30281

Phones and Fax Numbers

Call Free in the US: 800.659.5050
Local & International: 770.389.0501
Fax U.S: 888.353.7325
Fax Local & International: 770.389.0652