Contact Us

EPM, Inc.
112 W Burke St.
Stockbridge, GA 30281
800-659-5050
sales@epm.com

Phones and Fax Numbers

Call Free in the US: 800.659.5050
Local & International: 770.389.0501
Fax U.S: 888.353.7325
Fax Local & International: 770.389.0652
///Water-Jet Cut Gaskets
Water-Jet Cut Gaskets 2016-12-29T09:16:42+00:00

Water-Jet Cut Gaskets


wjpart
Qualities & Characteristics:
No heat affected zone
No warpage
Environmentally safe
Minimal waste
Superior Edge Quality
Complicated shapes and cuts
Tolerances ± .003
.010″ up to 8″ thick
Minimum Hole Dia. : .060
Quick Turnaround
wjcuttingmulti
waterjetgasket
wjmachine
EPM can supply cut gaskets and special shapes using the latest water-jet cutting technology.

Small Parts
From .060″ or 1 mm hole diameter with tighest of tolerances

Large Parts
Solid one piece gaskets can be supply up to 84″ or 2100 mm outside diameter with out sectional joints or dove-tail splices

Thick Parts
Solid rubber up to 2″ or 50 mm thick leaving a clean, straight cut along the edge

Thin Parts
Materials from .001″ or 0.02 mm can be cut without damage to the materials