Contact Us

EPM, Inc.
112 W Burke St.
Stockbridge, GA 30281
800-659-5050
sales@epm.com

Phones and Fax Numbers

Call Free in the US: 800.659.5050
Local & International: 770.389.0501
Fax U.S: 888.353.7325
Fax Local & International: 770.389.0652
/DR102
DR102 2016-12-29T09:17:33+00:00

Rotary Seal – Style DR102

Uses: These are typical oil seal designs using either single lip, double lips, rubber outside, metal outside or made solid rubber. Each seal includes the stainless steel garter spring. EPM can also provide your seal design. the metal used in these oil seals is aluminum.

Note: We can ship this seal style fast up to 12 inches or 300 MM outside diameter. This seal is also available up to 60 inches or 1500 MM outside diameter but may require a longer production time.

Cross Reference: Directly interchanges with: Seal-Jet R1 or R2, CR, National, Garlock, NOK, Merkel Radiamtic, James Walker.

This seal is infinitely variable in sizing. We can change any dimensions to suit your seal application – whether it be for changes in the metal parts you made, wear on the component where the seal fits or redesigning an existing piece of equipment. Changes as little as .001″ or 0.25 MM can be made.

Materials Available for EPM Style DR102
Part #1
EPDM Rubber (EPDM)
Nitrile (NBR)
Polyurethane (HPU)
Silicone (SIL)
Fluoroelastomer (FPM)
Virgin PTFE (TFV)

Part #2
Polyoxymethylene (POM)
PTFE/Nickel (TFN)
Aluminum (ALU)

Please include materials in your order

Seal Dimensions Diagram

Below is a diagram of the seal’s dimensions.The blank boxes are the necessary sizing information that EPM needs to make your seal.

Seal Dimensions Diagram Below is a diagram of the seal’s dimensions.The blank boxes are the necessary sizing information that EPM needs to make your seal.

Use any of the following ways to contact us for a quote on this style seal.

Call Us
Call Free in the U.S. – (800) 659-5050
Local & International – (770) 389-0501

Fill-Out Short Online Form (click here)

Send Us The Seals
Contact your EPM Seal Specialist and they will give you the EPM FedEx or UPS account number to cover the shipping charges. Then, you can send us your old seals to the address below.
EPM Inc.
112 West Burke Street
Suite G
Stockbridge, GA 30281
USA

Fax
Free in the U.S. – (888) 353-7325
Local & International – (770) 389-0652