V-SEAL Types

V-SEAL TYPES

DESCRIPTION
The V-SEAL is an all elastomer axial seal for shafts and bearings. It seals axially against a counterface. This type of seal has been used widely for several applications and has proved to be reliable and effective against dust, dirt, water and oil splash and other media.

The ring consist of three parts:

a- The seal body, installed with interference to the shaft.
b- The hinge, acting as a sprung connection between the body and the lip.
c- The conical self adjusting lip which provides the actual dynamic sealing against the counterface.

The counterface can be the outside of the bearing cap, a washer or any suitable metal pressing.

STANDARD V-SEAL TYPES

(Click on any image to view a sizing diagram of that particular type)

VA type:
is the most common profile. It has a perpendicular rear face. Wide range of sizes from 3 to 2020 mm shafts. VS type:
with wide body to ensure higher radial force than VA type. Range of sizes from 5 to 210 mm shafts. VL type:
this seal is intended for applications where space available is limited. Range of sizes from 135 to 630 mm shafts. VE type:
is our heavy duty large diameter seal, used in steel mills, paper mills and rolling mills as a dirt/water excluder seal. A standard clamping band can be used to improve axial fixation.

PHONE

CALL FREE IN THE U.S.
(800) 659-5050
LOCAL & INTERNATIONAL
(770) 389-0501


Call EPM during business hours and get a FAST QUOTE today!				We accept Visa, MasterCard, Discover, and American Express.

FAX

FAX FREE IN THE U.S.
(888) 353-7325
LOCAL & INTERNATIONAL
(770) 389-0652

Office hours: Monday - Friday, 8:00 a.m. to 5:00 p.m. (ET). On call 24/7 for Seal EMERGENCY!

Privacy Policy | Quality Assurance | MSDS Sheet | Terms & Conditions
© 1996-2006. EPM, INC. All rights reserved.