'Safegard' Seal

'SAFEGARD' SEAL

The 'Safegard' patented and unique design improves on seals currently available, provides maximum bearing protection and superior sealing performance.
'Safegard' is a suitable replacement for the open backed and fully metal enclosed (metal clad) seal.
Cost effective replacement for heavy duty, larger diameter seals, including finger spring designs.
Can also be supplied with lugs.
Inner diameter dependent on size of seal and run- out of shaft but generally designed for shaft size +2.5mm ± 0.5mm.
Shape of sealing lip depending on interference required.
Pressure design available.

METAL MATERIALS

Mild steel - BS1449 EN2 CR4 Stainless steel - BS1449 Part 2 1983 Grade 316 Brass - BS2870 1987

SEALING LIP

Nitrile®, Viton®, PTFE.
Standard section (Difference between O.D. and I.D.) 25mm to 60mm (1 in. to 2 3/8 in.)

Temperature

-60°C to +250°C
-76°F to +482°F

Speeds

Maximum shaft speed
45m/s (147ft/s)

Sizes

Outer Diameter
152mm to 1737mm(6 in. to 68 in.)
Dependent on material
Width
12.7mm to 35mm(1/2 in. to 1 3/8 in.)

PHONE

CALL FREE IN THE U.S.
(800) 659-5050
LOCAL & INTERNATIONAL
(770) 389-0501


Call EPM during business hours and get a FAST QUOTE today!				We accept Visa, MasterCard, Discover, and American Express.

FAX

FAX FREE IN THE U.S.
(888) 353-7325
LOCAL & INTERNATIONAL
(770) 389-0652

Office hours: Monday - Friday, 8:00 a.m. to 5:00 p.m. (ET). On call 24/7 for Seal EMERGENCY!

Privacy Policy | Quality Assurance | MSDS Sheet | Terms & Conditions
© 1996-2006. EPM, INC. All rights reserved.