Contact Us

EPM, Inc.
112 W Burke St.
Stockbridge, GA 30281
800-659-5050
[email protected]

Phones and Fax Numbers

Call Free in the US: 800.659.5050
Local & International: 770.389.0501
Fax U.S: 888.353.7325
Fax Local & International: 770.389.0652
‘Safegard’ Seal 2017-01-06T12:04:45+00:00

‘Safegard’ Seal

  • The ‘Safegard’ patented and unique design improves on seals currently available, provides maximum bearing protection and superior sealing performance.
  • ‘Safegard’ is a suitable replacement for the open backed and fully metal enclosed (metal clad) seal.
  • Cost effective replacement for heavy duty, larger diameter seals, including finger spring designs.
  • Can also be supplied with lugs.
  • Inner diameter dependent on size of seal and run- out of shaft but generally designed for shaft size +2.5mm ± 0.5mm.
  • Shape of sealing lip depending on interference required.
  • Pressure design available.

safegard 


safegard_dia

safegard_pic1

METAL MATERIALS
Mild steel – BS1449 EN2 CR4
Stainless steel – BS1449
Part 2 1983 Grade 316
Brass – BS2870 1987

SEALING LIP
Nitrile®, Fluoroelastomer (FPM), PTFE. Standard section
(Difference between O.D. and I.D.) 25mm to 60mm (1 in. to 2 3/8 in.)

 

 

 

 

 


Temperature

-60°C to +250°C
-76°F to +482°F

 

 

 


Speeds

Maximum shaft speed
45m/s (147ft/s)

 

 

 


Sizes

Outer Diameter
152mm to 1737mm(6 in. to 68 in.)
Dependent on material
Width
12.7mm to 35mm(1/2 in. to 1 3/8 in.)