Style 100
Corrugated Solid Metal

Especially suited for machined flanges in sealing steam, water, gas, oil, chemicals, etc. Withstands pressures up to 1000 psi and extreme temperatures.

Style 102
Single Jacket Corrugated Metal Liner

Style 104
Wrapped Corrugated Metal Liner

Liner covered on inside edge and both sides with either plain or wire woven asbestos cloth.

Style 105
Corded Corrugated Metal

Twisted asbestos cord cemented into corrugations on both sides.

Style R
Spiral Wound

Preformed interlocking metal strips spirally wound with interwound plies of asbestos stripping.

Style 142
Corded Profile

Twisted asbestos cord cemented into grooves on both sides.

Style SMG
Spiral Wound With Flexible Centering Guide

Style CG
Spiral Wound With Combination Compression Limiting Gauge And Centering Guide

Style 120
Single Jacket

A heat resistant filler partially enclosed within a metal shell is easily compressed. Ideal for narrow-faced flanges found in boilers, compressors, pumps, diesel and gas engines, etc.

Style 121
Double Ferruled

A heat resistant filler covered on both edges with metal ferrules.

Style 123
Double Jacket

A heat resistant (up to 1650°F) filler completely enclosed within a two-piece metal shell. Available immediately in standard pipe flange sizes.

Style 144
Single Jacket Profile

Style 126
Corrugated Double Jacket

Extra strength and resilience to seal extremely high pressures. Withstands temperatures up to 1650°F. Used extensively in oil refineries, chemical and power plants.

Style 127
Double Shell

A heat resistant filler completely enclosed within two overlapping metal shells.

Style 129
Corrugated Double Jacket Solid Metal Liner

Style 130
French Type

A heat resistant filler within a metal jacket covering all but the outer edge. Usage limited to narrow flange width application.

Style 131
Two Piece French Type

Used in place of Style 130 where wide flange widths are encountered.

Style 145
Serrated

Thick solid metal with spaced concentric ribs.

Style 132
Three Piece Ferruled French Type

Style 133
Folded Liner Ferruled

Folded woven asbestos (plain or wire inserted) covered with metal on the inner edge.

Style 134
Extended Ferrule

A heat resistant filler with a metal jacket covering the inner edge and part of both sides.

Style 140
Solid Metal

Available in a variety of sizes and metals.

Style 141
Profile

Thick solid metal with concentric V-shape grooves.

Style 160
Folded Woven Asbestos

Plain or wire inserted, dry or rubberized.