Other Types of Oil Seals

Table 1 of 3  Next Table ->


tr_1
TR/1
Traditional, for normal utilization.
 

 


tr_c
TR/C
Seal provided with radial ports for the lubricant flow in case of coupled seals.
 

 


tr_m
TR/M
To be employed when the retaining plate is missing.
 

 

tr_2

TR/2
Lip design particularly flexible and with reduced contact surface, chamfered to make the installation easier.

tr_cs

TR/CS
Seal provided with perimetrical groove and radial ports for the lubricant flow in case of coupled seals.


tr_p
TR/P
With additional dust lip.
 

 


tr_3
TR/3
Lip design is particularly strong in the working area but flexible at the same time, producing a notable reduction of radial force on the shaft. Protected spring to avoid the slipping out from its housing.
 

 


tr_e
TR/E
For external sealing.
 

 


lup
LUP
General purpose application.
 

 


tr_ae
TR/AE
To be employed in the presence of pressure. Provided with an adequately stong lip and with a ring in PTFE to avoid lip overturning.
 

 


tr_g
TR/G
Particularly flexible seal moulded in homogeneus rubber with two different hardnesses.
 

 


lpd
LPD
(without spring retainer)
General purpose application.
 

 

Next Table