Cast Iron Piston Rings

CAST IRON PISTON RINGS

PERMASEAL

BUTT, ANGEL & STEP CUT PISTON RINGS AVAILABLE ON SPECIAL ORDER

	TWIN SEAL Developed specifically to provide the lowest possible leakage of any metallic piston ring seal. The basic design consists of two Butt Cu outer rings, a spring steel anti-extrusion ring and an elastomeric inner seal. When Twin-Seal is used to pass ports, each outer ring must be wider than the diameter of the port.		HOOK TYPE Used in automatic transmissions and wherever blind assembly requires passing counterbores and oil passge slots.

STEP CUT A standard piston ring design with proven reliability for noncritical sealing applications.	BUTT CUT Most often used where high leakage rates are permitted because of unrestricted oil flow through the open joint.	2 RING SET A Butt Cut inner ring and a Step Cut outer ring provide excellent high temperature - high pressure sealing performance.	3 RING SET Best possible sealing with an all metallic seal. Set consists of 1 Butt Cut inner ring and 2 Butt Cut outer rings.

EPM CAN SUPPLY CAST IRON PISTON RINGS UP TO 12" IN DIAMETER IN A HURRY WITH WIDTHS UP TO 1/2" - AND DIAMETERS UP TO 36" WITH WIDTHS UP TO 1" IN A FEW WEEKS

PHONE

CALL FREE IN THE U.S.
(800) 659-5050
LOCAL & INTERNATIONAL
(770) 389-0501


Call EPM during business hours and get a FAST QUOTE today!				We accept Visa, MasterCard, Discover, and American Express.

FAX

FAX FREE IN THE U.S.
(888) 353-7325
LOCAL & INTERNATIONAL
(770) 389-0652

Office hours: Monday - Friday, 8:00 a.m. to 5:00 p.m. (ET). On call 24/7 for Seal EMERGENCY!

Privacy Policy | Quality Assurance | MSDS Sheet | Terms & Conditions
© 1996-2006. EPM, INC. All rights reserved.