Contact Us

EPM, Inc.
112 W Burke St.
Stockbridge, GA 30281
800-659-5050
[email protected]

Phones and Fax Numbers

Call Free in the US: 800.659.5050
Local & International: 770.389.0501
Fax U.S: 888.353.7325
Fax Local & International: 770.389.0652
Metal Gasket Styles 2016-12-29T09:16:42+00:00

Metal Gasket Styles

 

metal_100
Style 100
Corrugated Solid Metal

Especially suited for machined flanges in sealing steam, water, gas, oil, chemicals, etc. Withstands pressures up to 1000 psi and extreme temperatures.

 


metal_102
Style 102
Single Jacket Corrugated Metal Liner

 


metal_104
Style 104
Wrapped Corrugated Metal Liner

Liner covered on inside edge and both sides with either plain or wire woven asbestos cloth.

 


metal_105
Style 105
Corded Corrugated Metal

Twisted asbestos cord cemented into corrugations on both sides.

 


metal_r
Style R
Spiral Wound

Preformed interlocking metal strips spirally wound with interwound plies of asbestos stripping.

 


metal_142
Style 142
Corded Profile

Twisted asbestos cord cemented into grooves on both sides.

 


metal_smg
Style SMG
Spiral Wound With Flexible Centering Guide

 


metal_cg
Style CG
Spiral Wound With Combination Compression Limiting Gauge And Centering Guide

 


metal_120
Style 120
Single Jacket

A heat resistant filler partially enclosed within a metal shell is easily compressed. Ideal for narrow-faced flanges found in boilers, compressors, pumps, diesel and gas engines, etc.

 


metal_121
Style 121
Double Ferruled

A heat resistant filler covered on both edges with metal ferrules.

 


metal_123
Style 123
Double Jacket

A heat resistant (up to 1650°F) filler completely enclosed within a two-piece metal shell. Available immediately in standard pipe flange sizes.

 


metal_144
Style 144
Single Jacket Profile

 


metal_126
Style 126
Corrugated Double Jacket

Extra strength and resilience to seal extremely high pressures. Withstands temperatures up to 1650°F. Used extensively in oil refineries, chemical and power plants.

 


metal_127Style 127
Double Shell

A heat resistant filler completely enclosed within two overlapping metal shells.

 


metal_129
Style 129
Corrugated Double Jacket Solid Metal Liner

 


metal_130Style 130
French Type

A heat resistant filler within a metal jacket covering all but the outer edge. Usage limited to narrow flange width application.

 


metal_131
Style 131
Two Piece French Type

Used in place of Style 130 where wide flange widths are encountered.

 


metal_145
Style 145
Serrated

Thick solid metal with spaced concentric ribs.

 


metal_132
Style 132
Three Piece Ferruled French Type

 


metal_133
Style 133
Folded Liner Ferruled

Folded woven asbestos (plain or wire inserted) covered with metal on the inner edge.

 


metal_134
Style 134
Extended Ferrule

A heat resistant filler with a metal jacket covering the inner edge and part of both sides.

 


metal_140
Style 140
Solid Metal

Available in a variety of sizes and metals.

 


metal_141
Style 141
Profile

Thick solid metal with concentric V-shape grooves.

 


metal_160
Style 160
Folded Woven Asbestos

Plain or wire inserted, dry or rubberized.