Contact Us

EPM, Inc.
112 W Burke St.
Stockbridge, GA 30281
800-659-5050
[email protected]

Phones and Fax Numbers

Call Free in the US: 800.659.5050
Local & International: 770.389.0501
Fax U.S: 888.353.7325
Fax Local & International: 770.389.0652
Home/News

The World’s Smallest O-ring

Here at EPM we can and have manufactured the world’s smallest o-ring with an inside diameter of .4mm and cross section of 1mm.  This o-ring was machined at EPM in Stockbridge, GA on one of our CNC lathes. This o-ring was produced out of our high-grade polyurethane. With years of experience in machining seals of all shapes and [...]

By | 2017-07-21T13:39:49+00:00 July 21st, 2017|General, News|0 Comments

Give One Of Our “Seals Fast” Services A Try

    Need those little round things . . . seals, gaskets, o-rings, or washers? Try one of our "seals fast" services!   Seals Fast RED is good for same day or next day delivery. BLUE or standard service is ideal for slightly less critical needs. And our traditional GREEN service is perfect for less [...]

By | 2017-07-21T13:38:24+00:00 July 21st, 2017|General, News|0 Comments

Glossary of seal, gasket, packing and molded rubber parts term of the day: Accelerator (of vulcanization)

Accelerator (of vulcanization) - Any substance, which hastens the vulcanization of rubber causing it to take place in shorter time or at a lower temperature. In earlier days basic oxides such as limes, litharge and magnesia were recognized as having this function.   Nowadays the important accelerators are organic substances containing either nitrogen or sulfur or [...]

By | 2017-07-21T09:27:10+00:00 July 21st, 2017|Glossary of terms|0 Comments

The Four Cornerstones of EPM

  EPM offers our customers what we like to refer to as "The Four Cornerstones". 1) Sizes:  We can produce seals from less than 1" up to 60"+ or metric sizes from less than 1mm up to 1500mm and anything in between.  The makes us very versatile. 2) Material:  We offer 9 standard materials, including [...]

By | 2017-07-21T13:36:35+00:00 May 2nd, 2017|General, News|0 Comments